From two aspects the marble design table lamp adds new decor. It provides it is the need light, and it is the decoration which possibly expands in the room theme. The lamp may do nearly by anything: The piano leg, the secondhand book, the beverage bottle, the cigar box, the metal you can think toy and other. Increases the fantasy piles up through to make the lamp to the child room by the wooden alphabet block which or for you have the teacup lamp's dining room to bring the romance. With your clean beverage bottle aft extrapolated that you want the place which the electric wire comes from, and rises about two inches from the base.  Establishes 1/4 inch hole in the slow drill, stopped down the retention frequently from the conclusion heating position and the glass. You drill the hole to stop and to wipe the region and the soap irrigation. Once the hole drill destroys the bottle to cause all dust again to be separated from the bottle.Feed wire inside pulls it through the base and from above, draws out the extra 2-3 inches, therefore you can make the wiring. Start  marble design table lamp  by to enable at its side feeding bottle decoration to have the marble pattern to enter the bottle, front enough marble should be moved toward the label. This help retention weight in lamp's base. Is that as it may the wire to take by the marble is increasing the clear silicone resin or the hot agglutination to retains the wire 1/4 inch hole in the center.