The finish on honed marble can sometimes become dull and unattractive. The solution to this problem is to restore the marble. The finish on honed marble often becomes damaged when acidic chemicals (which cause etching) come into contact with the marble surface. Damage also can be caused by stains, which are sometimes extremely difficult to remove. The best use of honed marble is in any other room besides the kitchen or bathroom--say for a buffet in the dining room, where it will not be subjected to as many harmful substances.

1
Use a dampened sponge to clean the honed marble thoroughly.

2
Sand the honed marble using medium-grit sandpaper until it is smooth, but still a bit rough, so that the primer will adhere to it better. Wipe away the dust from the sanding process using the sponge.

3
Tape around the edges of the honed marble with painter's tape to protect any adjacent surfaces. This includes the sink; tape around the inside edge of the sink.

4
Apply a coat of primer to the honed marble using a small paint roller. Ensure that the entire area of marble is covered evenly. Allow the primer to dry according to the manufacturer's directions, which can vary from brand to brand.

5
Spray a coat of stone finish on the honed marble, matching it closely with the color of your honed marble. Cover the counter evenly and thoroughly before allowing the stone finish to dry completely, according to the manufacturer's directions.

6
Using disposable cups with polymer resin in them, pour the resin onto the honed marble, a small amount at a time. Use the paint spreader to catch any drips and to push the polymer resin back into place. A generous layer of polymer resin will result in a high-shine finish. Allow the polymer resin to dry thoroughly per the manufacturer's directions.

7
Use the sponge to wipe over the dried polymer resin for a damage-free, high-shine finish.