Quarrying natural stone and installing it in someone’s home is an incredibly long and arduous process. Removing a 40,000-pound block of stone from the earth and turning it into a handcrafted countertop or gleaming marble floor is not easy. There are many steps and intricate details which cannot be overlooked in order for a piece of stone to find the perfect setting where it will look beautiful for years to come.

Quarrying
The first step to finding the perfect slab is finding an optimal deposit of material with desirable color, pattern, and composition. This requires geologists to look for stone outcrops which are more easily examined since the bedrock is exposed. Samples are then obtained by boring into the earth to take core samples with expensive diamond-tipped drill bits. These samples are then tested to determine if the stone is suitable for use as dimensional building stone. Later they are polished so that their color and pattern can be examined to determine marketability.

Once this is done, the owner applies for a concession for the quarry area. After the concession is purchased, the next step is to apply for all of the correct licenses from the local, state and federal government. This is a lengthy process in the United States and an even longer process in third world countries where corruption can exist on every level of the application process. Sometimes it can take years for the necessary “approvals” to be authorized. All of the paperwork must be submitted before the actual quarrying process can begin.

Clearing the way to reach the best material allows a quarry to reach its full potential. Each quarry presents a unique challenge for the extraction of blocks. There may be months of removing overburden, or dirt, before the stone is accessible. Many times innovative construction, such as building roads or digging tunnels, is necessary to access the quarry. At other times, the quarry faces the complex challenges of being in the middle of a war zone, or the extremes of glacial temperatures.

It takes lots of experience, vision and hard work to bring a quarry into full production. A good quarry manager is able to control how to material is removed based on the veining and coloration within the deposit. The manager must have the vision to see how the stone "flows" through the quarry. The same stone can take on many different looks just based on how the block is cut from the wall and later processed. If it is cut with the flow of the source stone, it is called Vein Cut. Vein Cut highlights the movement in the rock. Alternately if the block is cut against the vein, Cross-Cut, it creates a more uniform look for the stone.

After the quarry manager decides how to extract the blocks, the drilling can begin. The process starts by taking down a “bench wall,” a large dimensional chunk of rock that is then cut into smaller blocks which will eventually be sent to the factory for processing. The bench walls are cut using a combination of diamond wire cables, drills and even high temperature torches that will melt the stone. Dirt is pushed up against the base of the wall to cushion the fall, and small dynamite charges jar the wall loose to bring it down to a horizontal position. The blocks can then be drilled from the bench wall. Blocks of a given type of stone usually have a fairly uniform size, due to the size of the processing equipment used. Granite blocks usually weigh between 38-42,000 pounds, while lighter marble and travertine blocks weigh between 15-25,000 pounds.

Once the blocks have been extracted, the journey to the processing facility can begin. For blocks processed in the same country, the trip is short in distance, but long in duration. The blocks could be high in the mountains of Brazil or off the beaten paths of India. Others are bought by overseas processors with skilled speculative buyers who combine geological science with an eye for color to select the best blocks for processing.

Processing
Once blocks of stone reach the processing facility, they are cut down into smaller more manageable pieces. For tile, this means cutting the stone into billets before polishing. For slab materials, this typically means a trip to the gang saw. A gang saw works just like a giant bread slicer, with many adjustable blades that allow for the thickness of the slabs to be adjusted. The gang saw can cut the entire block of stone into slabs at one time. More delicate materials may require the use of a diamond wire saw to gently cut one slab at a time with less trauma to the stone. The most recent technology involves multi-wire gang saws which have the potential speed production on exotic materials exponentially. 
 
After slabs are cut on the gang saw, they are moved one at a time to the polishing line, where they are laid horizontally on a large conveyer type line called a polishing line. There, they pass under polishing heads which begin with very coarse diamond abrasives, and then move to finer and finer grit abrasives, just like sanding wood. Travertine slabs and some marbles, will receive a cementicous or epoxy compound to fill the natural voids of the stone. Part of the way through this line, slabs of granite, marble, and onyx will receive a coating of a resin treatment which will fill in any pits or micro fissures which are inherent to the stone in order to make the final surface easier to clean. Most of the excess resin is removed by further polishing, with only 1% remaining on the finished surface. For materials where the final surface is to be honed, the process will stop with a lower grit abrasive than materials with a polished surface.

For stone that will be processed into tile, long strips of material experience the same polishing process, before being cut to size. Some tiles, especially polished materials, will additionally have a small bevel, or arris, added which will make the final installation look flawless.

At this point the materials are checked for quality and carefully packaged for their long journey. Tiles are packed into boxes and tightly fit into wooden crates that will protect them from bumps along the way. Slabs are bundled together and braced with a wooden framework, custom built to ensure the slabs stay upright during the shipping process. All materials are loaded into standard 20 foot shipping containers and braced to prevent any shifting or movement which could cause damage to the material. Due to the immense weight of stone, many containers are not fully packed, but are loaded to maximum weight limit of 42,000 pounds, or 20 tons.

The journey begins when the container is loaded by massive cranes onto a large ocean vessel. After about four or five weeks at sea, they arrive at US ports. Here the containers are offloaded with cranes, passed through customs, and transferred to rail cars for the trip to the Midwest. The last leg of the journey is a quick trip via tractor trailer from the rail depot to Global Granite & Marble’s door.